Category Archives: HDD

DC Drilling mud recycling system for HDD field

Horizontal Directional Drilling (HDD) is a trench less method to install pipes where there are some kinds of barriers which makes the regular pipe laying down hard or not possible.

Specific solid control system can be used in HDD industry to recovery the drilling mud. To be as an leader of drilling mud cleaning system manufacturer. We have many designs of solid control for HDD fields. Such as DCGPM350, DCGPM500, DCGPM900 and DCGPM1200.

SONY DSC

SONY DSC

HDD Mud Recycling System is made up of drilling rig mouth to return to mud of the ground through the mud into the mud pit, using liquid slurry pump or vertical sand pump the submersible supply to shale shaker,and then male the shale shaker removing out of solid phased particles, the processed mud fall into the mud tank having many separate space.

SONY DSC

SONY DSC

DC Solids Control is a top manufacturer of Horizontal Directional Drilling(HDD) Mud Equipment/HDD Mud Recycling System. DC drilling mud recycling system has been applied in many countries for HDD and CBM drilling operation. Especially popular in Australia ,Indonesia, India etc. If you have interest with it, please feel free to
contact us, our senior engineer will giving you the best design and best price.

500GPM Mud Recycling System For HDD Site

500GPM mud system is a top configuration for HDD site. It contains first phase treatment shale shaker, second phase desander cone and third phase desilter cone installed on shaker for second equipment, 2 sets of centrifugal pumps, 1 set mixing hopper and 1 set of mud tank. The tank size can be customized from 6 meters to 12 meters depending on tank capacity requirement.

Recently, we have one sets of 500gpm HDD mud system ready for delivery.

SONY DSC

SONY DSC

The HDD compact mud system including equipment as below:

1)1 X Mud cleaner DCQG850, with 6 pcs desilter cyclones and 1 pcs down deck shaker. This mud cleaner can separate the mud solids above 40 microns with desander parts and above 25 microns with desilter parts. 1 microns = 1 X 10-6 meter
2)2 X Centrifugal pump, one is feeding for desilter cones. And the other one is for mixing.
3)1 X mud tank with 3 compartments, storage the mud processed in different steps.
4)1 X electrical control panel which recessed into mud tank for better protection during transporation.
5)1 X accessories, including walkways, ladders, lights, cables etc.

HDD mud recycling system is suitable for construction projects with high mud capacity. Above all, DC Solids Control is a professional manufacturer of HDD mud system in China. Furthermore, we also customize according to client’s requirement. While you have any new inquiry about solids control equipment like shale shaker, mud agitator, mud cleaner, jet mud mixer, vacuum degasser, mud gas separator, flare ignition device, also some mud recovery system, welcome to contact with us. DC waiting for your contact.

Compact DCMC250GPM Mud recycling System Used for Thailand HDD site

Recycling and reusing drilling fluids is becoming increasingly common on jobs with mid-size horizontal directional drill (HDD) projects where previously that practice was uncommon.

HDD mud system

Recent days. DC Solid control company shipped a set of DCMC250GPM mud recycling system used for Thailand HDD drilling site. The mud system is engineer designed to clean, recycle and mixing drilling mud in one mud tank package. The flow capacity is 250gpm + with shaker operating at 40 mesh screens and mud density 1.2g/cm3. It removes undesired drilled cuttings down to 12 microns with 4″ desilter cones. Compact design and small foot print allows it to be easily moved and transported .

mud system

Mud Cleaning System Configuration
1 x mud cleaner (2 x 10″ desander, 1 x dewatering shaker screen)
1 x transfer pump,
1 x mixing pump, 1 x mixing mud hopper
cat walk, handrails, valves etc.
electric control system
All the equipment and parts are configured on one mud tank (2 x 1.8 x 15m)

DC Solidc control design and manufacture compact drilling mud system from 200GPM upto 2000GPM for HDD, water well drilling etc. Customized ! Compact ! Module-Built!

DC Customized Mud Recycling System for HDD

Horizontal directional drilling short name is HDD. HDD technology has the obvious in oil and gas pipelines crossing the rivers, lakes, highway, railway hub and other obstacles and important area.

Relative to the use of drilling fluids within the oil &gas industry, the use of drilling fluids within the horizontal directional drilling (“HDD”) industry, is new. As the use of HDD technology did not become mainstream until the 1980’s, it took another decade before drillers started to consider the use of basic drilling fluids. Even today, the amount of research and development aimed at HDD drilling fluids is considered a rounding error in the oligopoly of drilling fluid manufacturers.

SONY DSC

SONY DSC

HDD Mud Recycling System is made up of drilling rig mouth to return to mud of the ground through the mud into the mud pit, using liquid slurry pump or vertical sand pump the submersible supply to shale shaker,and then male the shale shaker removing out of solid phased particles, the processed mud fall into the mud tank having many separate space.

DC Solids control as drilling waste management company is dedicated to supply different kinds of drilling fluids recycle units such as shale shaker, de sander, de silter, centrifugal pump and hopper. Also, we provide the complete system matching with different size of rig from 150GMP mini system to 2000GPM large system.

Dachuan solid control system for Horizontal directional drilling

Horizontal directional drilling mud solid control system is a device and system for controlling the solid particles in the slurry produced by horizontal directional crossing. Dachuan Machinery is a professional manufacturer for horizontal directional.

  1. Horizontal directional drilling (HDD) technology has obvious advantages in the oil and gas pipelines crossing rivers, lakes, transportation lines, railway hubs and other obstacles and important regions. The diameter of the hole of horizontal directional crossing pipe diameter is generally 1.3 to 1.5 times.
  2. Horizontal directional drilling through the so-called mud solid control (usually referred to as the solid control) process is to control the solid particles in the mud, the principle and technical methods. Through the solid control technology to remove the harmful solids in the mud, retain the useful solid phase, to meet the requirements of the mud performance through the process. The harmful solid phase in the horizontal directional drilling through the mud is the drilling cuttings which mainly refers to the wear of the equipment and the influence on the rheological properties of the slurry.
  3. Solid control system used in the horizontal directional crossing: at present, horizontal directional crossing mud solid control recovery system consists of domestic and imported the accounted for half of the country, the import is mainly small, with imported drilling machine matching; domestic is mainly large, according to user needs to be prepared. Whether domestic or imported, the choice of the fixed control system is mainly based on the following principles:

Type and size of particles to be cleared or suppressed;

Through the need to maintain the quality of mud;

The size of drilling rig capacity, solid phase clearance rate and circulation rate.

mus-system

Tangshan Dachuan solid control is a company specializing in the production of horizontal directional crossing mud system manufacturers, our company engineer with more than a decade of horizontal directional crossing slurry system design and production experience, all the use of my company horizontal directional traveling across the mud system of old and new partners are given from most of the year-round friendly cooperation cully. Our company has a mature production process and quality control system.