Monthly Archives: April 2020

The inventory sales of DCZCQ240 Vacuum degasser

ZCQ vacuum degasser is a special equipment to deal with gas drilling fluid, which is applied to the mating of the other drilling equipment to eliminate the harmful gas of the fluid, to recover the specific gravity and stabilize the viscosity of the fluid. The vacuum degasser is an important part of drilling mud cleaning system.

To meet some clients urgently requirements, DC Solid control manufactured more than 10 sets DCZCQ240 Vacuum degasser for sale. The degassers are used to clean the gas in the drilling fluid, to ensure the drilling fluid property relatively stable, to guarantee the steady operation of swirlers. The degassers can be grouped into two kinds: ordinary pressure type and vacuum type. The ordinary pressure degasser is to use the centrifugal to take out gas to invade the mud, with the help of centrifugal force to make the mud spraying in the jet tanks and striking on the wall to make gas releasing.


The vacuum degasser is to use the suction of the centrifugal, forming negative pressure in the vacuum tanks, under the action of drilling fluid at atmospheric pressure, through the suction pipe into the hollow shaft, then by umbrella piece of around the hollow shaft assembly, they jet to the skin of tank.

vacuum degasser

Structure characteristics
1 The application of the gas and liquid separation can’t make gas and liquid is discharged at the same time. Besides, can circulatory supply water into the vacuum pump.
2 Use the belt to drive, avoid the complexity of the deceleration institutions.
3 The main motor is bias, the focus reduced.
4 The mud through the window of the trochanteric spray to the wall of the tank, the effect of the degassing is good
5 Two levels of the separation gas and the tank is the assembly, the structure is compact.
6 The water ring type of the vacuum degasser in the process of working, always in the constant temperature to work, the performance of safety is high.

If you have requrement please contact us freely, you will getting biggest discount before June.

4 Set of ZYQ800 Mud gas separator shipped to Indonesia

Poor Boy Degasser or Mud Gas Seperator, located downstream of the choke manifold, is a vertical vessel used to separate any gas from drilling fluid during well control situation. We got an repeat order of the 4 sets ZYQ800 mud gas separator from Indonesia tender project.

mud gas separator

The mud gas separator is utilized where the amount of undesired gas was carried to the surface and does not interfere with the drilling fluid column, the separator provides effective gas control, venting gas at a safe distance from the rig and returning drilling fluid to the system in a controlled flow. When fluid passes over the separator baffles, gas escapes easily and is carried by the top vent line to the remote igniter where it can be burned off.

mud gas separator5

Main Features
Raw material is H2S resistant for more durability. Common steel at economical cost is for option.
Heavy anticorrosive painting both internal appearance and external appearance, 3 layer painting.

If clients prefer higher leveled products, we can also fabricate them with the Q345R plate. With more stronger resistance on H2S and so on. Please don’t feel hesitated to contact us if you have any question or interest.

The 500GPM Mud Recycling System Is Being Assembled

DC Solids Control is a top manufacturer of Horizontal Directional Drilling(HDD) Mud Equipment/HDD Mud Recycling System. DC drilling mud recycling system has been applied in many countries for HDD and CBM drilling operation.Especially popular in Australia ,Indonesia, India etc.

mud recycling system

A 500GPM mud recycling system is being assembled in DC workshop and prepared to shipepd to India HDD field. According to different geological conditions and customers ’ requirements, DC can design and manufacture different sets of mud recycling systems to match with GD Drilling Rig. Welcome to consult and discuss. Your satisfaction
is our eternal pursuit.

mud system

Features of HDD Mud Recycling System
1.Mud recycling and mud mixing included in DC standard model, the combination including complete line of mud recycling and mud mixing with suitable mud storage.
2.Compact design with minimum foot print. All equipments on tank top will sit on tank while local transport moving to allow fast moving and installation from jobsite to jobsite. Handrail and walkway can be folded on tank top or tank side with quick lock.
3.Composite material screen install on shale shaker to help for a better performance and longer screen working life. DC shaker screen build as per API RP 13C regulation to meet worldwide client’s requirement.
4.Mud tank each corner weld container standard lifting lug for lifting tank and lock tank on trailer.
5. Self clean mud tank or V type mud tank for easy cleaning, each mud tank compartment install clean gate with butterfly valve.mud tank size and pipeline arrangement can be customized depending on jobsite requirement.

To be as the manufacturer of mud system in trenchless construction, DC have the mature mud treatment solution, and customized the DCHDD series Mud Recycling System for our customers. For more information please contact our email

Application benefical of DC Vacuum Degasser

DC vacuum degasser is a self-contained unit, The gas-cut mud is drawn into the degasser by a vacuum created by a regenerative vacuum without needing centrifugal pump.Moreover, DC poor boy degasser can act as a big agitator for the drilling mud.

DC Vacuum Degasser is a special-purpose device and a new type one for the treatment of gas in the drilling fluids. It can get rid of various gas of invasive drilling quickly. Vacuum degasser is very important for returning mud gravity, stabilizing mud viscosity and reducing drilling cost.


Benefits of DC Vacuum degasser

1. Small footprint, save much space
2. Get better effect, decrease general cost
3. Make installation and handling more convenient
4. Mix drilling mud evenly, break the bubble
5. Enable installation in confined spaces due to small footprint
6. More convenient, save cost and tank space

vacuum degasser

DC vacuum degasser is vertical type. It’s compact, fresh style, Actually, vacuum degasser always set behind shale shaker. The internal impellers will mix the drilling fluid and break the bubble. Poor boy vacuum degasser will keep drilling fluid density, viscosity and weight. Get rid of small part of harmful invaded gas, such as H2S.

DC Solid Control is a total solids solutions provider. We offer industry leading solids control equipment including shale shakers, degassers, mud cleaners, deserter, desander and centrifuge. They are a complete circulating of mud systems.

2 Sets Of Mud Cleaner Used For HDD Site Delivery For China Client

Mud cleaner is a combination of desander, desilter and dewatering shale shaker. It is a compact design, small footprint, three in one unit widely accepted by nowadays
drilling contractors.

Last week , DC Solid control shipped 2 sets of mud cleaners for China HDD drilling site. It is often installed after the shale shakers where the sand trap drilling mud feeds into the desanders and desiters respectively, the underflow of hydrocyclones loads onto the dewatering screens for recycling the usefully drilling fluids back to the mud system.



DC Mud Cleaner advantages:

1. Good stability and durable;
2. Improved drilling fluid recovery; Longer screen life; Be capable of managing reactive, sticky, or fine solids;
3. Operators & environment friendly; Outstanding corrosion resistent Cost effective method of re-cycling drilling muds;
4. Reduces cost of supplying fresh mud; Avoids cost of disposing of liquid waste.



Our Mud Cleaner Applications: OIL&GAS DRILLING—-Solids Control System; HDD & CBM Drilling —-Mud Recycling System; Mining & Industrial—-Slurry Separation Plan; Coal bed methane (CBM) & Geothermal well drilling—Fluids Cleaning System.

If you haven’t found useful information about “Mud Cleaner” from this blog, please send inquiry to us, the request to our Company Email: we will feedback at the soonest!

Drilling Fluid Shale Shaker From China DC Machinery

Drilling Fluid shale shaker were first stage of solid control equipment, its work decide the effect of the back equipments and influence the wells. The design of our shale shaker was dericed from observation and operation of similar foreign products.



Shale shaker features:

high vibration intensity;
Large screen surface area;
Adjustable discharge angle during drilling;
Simple compact structure;
Reliable and great performance at a competitive price.
DCS Series linear motion shale shaker absorbed advanced tech at home and abroad and integrated DC own design. DC complete series shale shaker can meet customers’ variable demand. Clients’ feedback proved the advantages of this kind of shale shaker: high G-force, wide screen area, compressed structure, cost-effective, etc.



Shale shaker for solids control are devices that remove drill cuttings from the drilling fluid while circulating and drilling. There are many different designs and research into the best design is constantly ongoing since solids control is vital in keeping down costs associated with the drilling fluid.
Welcome to inquire drilling fluid shale shaker of DC Machinery , and welcome to visit and negotiate the business both at home and abroad ; Our company will provide for you the best shale shaker and other equipment related solid control with superior quality and most reasonable Price. And we will sincerely offer our best service to satisfy what you need.

The mud gas separator for turkey clients

The mud gas separator manufactured for Turkey market was finished assemble in cold wether and is going to ship to XinGang port.Another happly is the order is a bid project and processed for a long time, at last, we got the clients trust and beat all competitors.

Mud Gas Separator(Poor Boy Degasser) is a specific degassing equipment of drilling fluid with gas, it is mainly used to remove big bubbles in diameter no less than φ3mm in gas drilling fluid. We customized the mud gas separator according to the draw that provided by the end user.

Mud gas separator

Special parameters of the mud gas separator:
1. Main body diameter of th mud gas separator is 800mm and vessel thickness is 12mm.
2. The flow of liquid from the vessel can be regulated by a liquid-level-control valve or a u-tube, ensuring adequate retention time in the separator for the gas to break out.
3. It is skid-mounted and trailer transportable, which simplifies transport, spotting and installation, and can be laid down during over-the-road transport (non-permit load).
4. CCS Certificate must required.

DC use high quality steel materials manufacturing normal pressure prevent H2S Mud Gas Separator,can effectively prevent the harmful gas erosion, ensure the man- machine safety production. If you need niche market product, please contact us.