Monthly Archives: November 2019

Vacuum degasser was Pre-factory inspection from DC Solid control company

To be as a a company that values quality, all solid control equipment must tested about 12 hours before leave factory. Yesterday, the 3 sets of DCZCQ240 vacuum degasser was tested in DC solid control company and prepared to shipped to abroad.

ZCQ series Vacuum Degasser is a special-purpose device and a new type one for the treatment of gas in the drilling fluids. It can get rid of various gas of invasive drilling quickly. Vacuum degasser is very important for returning mud gravity, stabilizing mud viscosity and reducing drilling cost. Also, at the same time vacuum degasser can be used as a heavy-power agitator and supported applicable to all types of mud circulation purification system.

SONY DSC

SONY DSC

The vaccum degasser design of the structure is scientific and rational. So we are able to achieve an effective gas-liquid separation, filter out impurities and to ensure that the exhaust pipe is always smooth.

DC Solids Company is a professional oilfield vacuum degasser ( Gas Buster ) supplier from China, and can provide you with DCZCQ240-360 high quality Vacuum degasser ( Gas Buster ) . If you want to learn more about the oilfield vacuum degasser ( Gas Buster ) , you can visit: https://www.dcsolidscontrol.com/vacuum-degasser/vacuum-
degasser.html

China mud gas separator/poorboy degasser manufacturer

Mud gas separators are commonly used during oil drilling operations, particularly in situations when extraction is likely to yield a large volume of gas. Often referred to as degassers, these systems offer many benefits when drilling operations are centered on mud columns that are below optimal balance, and in so-called “sour gas” environments when there is a high concentration of hydrogen sulfide in the drilling fluid.

Parameter

DCZYQ series Mud gas Separator combined with the Electric Ignition Device can be used to ensure the drilling process smooth. It is devided into the normal pressure Mud gas separator and pressure auto-control Mud gas separator, according to the pressure.Mud gas Separator is your best choice to prevent drilling mud invasion.

SONY DSC

SONY DSC

Mud gas separators in other countries also called Poor boy degasser,Liquid-gas separators,Mud/Gas Separators, etc. DC Solids Control designs and manufactures ZYQ Mud gas Separators. Mud gas Separators is an extremely reliable, vital piece of safety equipment for today’s drilling operations. It is ideal for use where drilling is likely to encounter large volumes of gas, sour gas or when an operator is drilling with an under balanced mud column.

Hot sale model shale shaker from DC Solid control

Drilling Mud Shale shaker is the fundamental mechanical screening machine in the solids control process. Our heavy duty linear motion shale shakers are able to working for all onshore & offshore drilling activities.

The hot sales model shale shaker from DC Solid control is dual motion. Which is same with Mongoose PT shale shaker. The dual-motion shale shaker combines linear and balanced-elliptical motion technology for efficient removal. Using 0.6-hp vibrator motors for unparalleled performance, the DC Shale shaker is especially effective
while drilling top-hole sections where heavy, high-volume solids are usually encountered and shakers need to generate high g-forces to effectively move dense solids across the screens.

SONY DSC

SONY DSC

As drilling conditions change, the DC Dual motion shale shaker can be adjusted instantly by flipping a switch on the control box to immediately reconfigure the shaker from linear to balanced-elliptical motion without having to suspend or shut down operations, allowing operators to avoid NPT and unnecessary delays that drive up
costs.

All DC Series linear motion shale shaker absorbed advanced tech at home and abroad ,and integrated DC own design. DC complete series shale shaker can meet customers’ variable demand. Clients feedback proved the advantages of this kind of shale shaker: high G-force, wide screen area, compressed structure, cost-effective, etc.

Mud system desilter shipped Singapore clients

DC desilter is the third class solids control equipment to treat the drilling fluids. According to the size of the cone diameter, they are divided into Desander and Desilter. Usually the cone diameter is less than 6″is called Desilter, and used as the third-control equipment in drilling operation.

desilters

DC Solid control shipped more than 40 sets different capacity desilters to our Singapore clients used for building construction. Lats week, we shipped 3 sets CNQ100x12 desilter to the working site.

SONY DSC

SONY DSC

Usually Desilters remove sizes which are 20 microns or lesser whereas desanders removes the sizes from 50 to 70 microns. It is a hydroclone whose primary function is to remove sand and silt from the drilling fluids in the drilling rigs. The installation position of desilter is downstream from the desander in the surface mud system.

4″ drilling mud desilter cone specification:
1. Silt-sized solids removal (12 ~ 74 microns)
2. 100% polyurethane hydrocyclone
3. 80 gpm per cone at 75 feet of head
4. Variable size apex inserts
5. Available with and without a ramp in the feed inlet
6. Flexible fast connection is available for user to assemble
7. Compact design, small footprint

Please contact us for more details about the hydrocyclone units that most suits your conditions.

Brandt cobra shale shaker and DC shale shakers

NOV Brandt cobra shaker utilizes three pretension screens and linear motion to remove detrimental drilled solids from the mud system. this allows the cobra minimize mud losses while enhancing cuttings dryness. Maintenance on the cobra is minimal and only a small inventory of replacement parts is necessary to sustain optimal operation. additionally the shaker’s rugged design offers years of reliable operation.

The features of Brandt cobra shale shaker
Unique, rugged basket design
Few replacement parts
Provides optimal mud coverage of screen surface
Small parts inventory provides costs savings
A dry solids discharge help reduce mud lossed
Keeps the mud pool volume small, which helps to increase screen life

SONY DSC

SONY DSC

The DC standard shale shakers have following specifications.

The cut point is according to D100 from ASTM filtration test, etc. DC shale shakers also have requirements on conductance and non-blanked area.
The DC shale shakers will lead drilling fluid shaker screen a standard and give clients optimal solutions. Of course, different shale shakers producer and different brand drilling fluid shale shakers will have different features on same DC. This we ever talked before.

DC shale shakers will decrease inconvenience between original shale shakers and the replacement. All users will appreciate this to get correct solutions. And this is also high quality symbol. Our clients appreciate our shale shakers because of our high quality, short delivery, lower cost.

If you are interested please feel free to contact DC shale shakers.

Stock of different capacity desander and desilter

Desander and desilter is the common used machine in Oil and gas drilling, HDD project, No dig trenchless and ect. To meet users urgently requirements, DC Solid control manufactured some different model and capacity of desander and desilters for your choose.

The heart of the Desander, desilter and mud cleaner are the cyclonic cone (Polyurethane hydrocyclone), ranging from 4-inch to desilter’s up to 12-inch desanders.

Desander
Drilling fluid under pressure is directed into the cone through the tangential inlet. Rotary movement is created when the fluid strikes the curved inner wall of the cone. This sets up a centrifugal force which separates the fluid into conical layers. The heavier particles are forced to the cone wall and move downward by gravity.

The unit can be stonealone for use or assembled above our shale shaker through pre-designed connectors. The number of desander and desilter cones is customizable according to the real conditions.

desilter

10″ drilling mud desander cone

Sand size solids removal (40 ~ 100 microns)
100% polyurethane hydrocyclone
500 gpm per cone at 75 feet of head
Flexible fast connection is available for user to assemble
Compact design, small footprint

4″ drilling mud desilter cone

Silt-sized solids removal (12 ~ 74 microns)
100% polyurethane hydrocyclone
80 gpm per cone at 75 feet of head
Variable size apex inserts
Available with and without a ramp in the feed inlet
Flexible fast connection is available for user to assemble
Compact design, small footprint

Please contact us for more details about the hydrocyclone units that most suits your conditions. I promise that you will buy the most suitable desander and desilter from DC Solid control.

Use advantages of the drilling fluid centrifuges for solid control system

One of the most effective ways of solids control is with an oilfield decanter centrifuge. With a horizontal oilfield decanter centrifuge, the mixture of drilling liquid and cuttings and solids enter into the centrifuge. When it enters the centrifuge, it gets spun at an extremely high rate, sometimes as much as 3000 times the force of gravity. When this happens, the solids will separate from the liquids. When they are separated, the drilling liquid can be decanted and eventually returned to the mud tank where it can be replaced into the borehole for efficient drilling.

SONY DSC

SONY DSC

One of the biggest advantages to having an oilfield decanter centrifuge is the size that it takes up. Compared to other solids control equipment, a centrifuge takes up less real estate. On many oilfields the site footprint is not large enough to support a wide range of solids control equipment. A centrifuge is highly effective and efficient so you can separate solids from drilling liquids even on small drilling sites.

SONY DSC

SONY DSC

The Decanter centrifuge are used to process unweighted and weighted, water-based and oil-based drilling fluids (muds). Mechanical energy is utilized to increase the gravitational force exerted on solids that are present in the mud system.oilfield Decanting Centrifuge are able to apply over 3,000 G-forces on the liquid/solids mixture, which separates the heavier solids from the lighter solids. Additionally, high G-forces separate fine solids from liquid.

Our factory and company are Quality Management System ISO 9001-2000 certified. DC Solids Control operate international oil gas drilling mud separation system. Ruggedly built for oilfield and industrial Solids control service, decanting centrifuge is especially effective in meeting fluid-on-cuttings discharge requirements in environmentally sensitive areas. decanting centrifuge also deliver high fluid recovery rates and efficient solids control to significantly reduce the operator’s total mud cost and limit waste disposal volumes.